[TenTec] 4-pin inline male mic jack

[Mike Hyder]

With most of those plugs/jacks, you can remove the black part which has the
pins by removing a small screw.  Then you could take a chassis one and put
it into an inline case.

Mike

----- Original Message -----
From: "Mark Erbaugh" <mark@microenh.com>
To: <TenTec@contesting.com>
Sent: Thursday, November 29, 2001 11:01 AM
Subject: [TenTec] 4-pin inline male mic jack


> Does anyone have a source for a 4-pin inline male mic jack (one that I
could
> plug a 705 mic into)? I just purchase a RigBlaster Plus for use with my
Omni
> V and Pegasus. It comes with 8 pin connectors. Fortunately, the cable from
> the Rigblaster to the radio connects to an RJ45 on the Rigblaster and I've
> got those plugs and a crimp tool around from making up Ethernet cabling.
>
> I can find chassis mount jacks, but I want an inline one to make an
adapter
> cable.
>
> I checked with the RigBlaster folks and they will custom make a RigBlaster
> plus with 4 pin connectors (for the same price as the 8 pin one), but I
went
> with the 8-pin one so I can use it with non TT radios.
>
> I'm kinda kicking myself. I passed up a couple of these jacks at the Ft.
> Wayne hamfest a couple of weeks ago.
>
> 73,
> Mark
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>