[TenTec] Re: Jupiter Cooling Fan?

[Mike Hyder -N4NT-]

Hi, Gary--

I don't know why you asked me bout this.  I've not mounted a fan on a
heatsink, but I've given some thought as to a way to mount a fan to the
heatsink of a rig.  I'd probably try a small computer fan that runs on
12vdc.  You can probably get all you want at a place which repairs
computers -- just get a couple of power supplies from their trashcan.  You
could put rubber or felt feet on one edge of the fan and just sit it on the
desk behind the rig.

I keep thinking that a fellow could use some of those little plastic
expansion widgets that go into sheetrock.  Then a screw goes through a fan
mounting hole and into the widget.  What that might do is to expand the
widget to give it purchase on the fins.

Please report back to the reflector your success/failure with this or any
other method.

73, Mike N4NT

----- Original Message -----
From: "Gary Jacek" <gary-jacek@telus.net>
To: "Mike Hyder -N4NT-" <N4NT@charter.net>
Cc: "Ten-Tec Reflector" <tentec@contesting.com>
Sent: Sunday, December 29, 2002 11:49 PM
Subject: Jupiter Cooling Fan?


> The TT Jupiter manual recommends a cooling fan for operating in digital
modes.
>
> Does anyone have a recommended way to mount a fan on the heat sink?  What
size?
> Powered off the 12V Accessory outlet?  Thermostatically controlled?
>
> Tell me how you did it, preferably with photos.
>
> Gary
> VE7GGJ