[TenTec] PSK Interface

[duffyb01 at fuse.net]

Donner Digital Interfaces are only $40.  I have two of them, one for the Jupiter and one for the Kenwood.  It is important that at the very least you use isolation transformers.  You can go into the Omni directly, but a spike through the computer could damage your rig.  For $40, prebuilt on the Donner interface, you can't go wrong.

http://home.att.net/~n8st/

Duffy - WB8NUT


> 
> From: "Edmonds, J.B." <jedmonds at dit.state.va.us>
> Date: 2002/02/13 Wed AM 08:25:46 EST
> To: "'wo8l at att.net'" <wo8l at att.net>,  tentec at contesting.com
> Subject: RE: [TenTec] PSK Interface
> 
> Not knowing exactly your setup, I think that you can use the "audio in"
> jack.  You do have to key the rig however and that's the part you did not
> address.  You may also have to lower the input audio level.  Many of the PSK
> web sites show you a circuit to provide "audio in", "audio out" and keying.
> Do you have "vox' on?  
> 
> You can buy a prebuilt interface for about $20 or go the "RigBlaster" route
> for a few dollars more.  Tentec gives us the jacks on the back so we need
> not use a mike connection and that's how mine work.  I have the mike
> connected and my PSK connected to the rear.  Worlks great.
> 
> 73  JB  N4NQY
> 
> -----Original Message-----
> From: wo8l at att.net [mailto:wo8l at att.net] 
> Sent: Sunday, December 30, 2001 3:56 PM
> To: tentec at contesting.com
> Subject: [TenTec] PSK Interface
> 
> 
> Hi,
> 
> How do I interface an OMNI V to my computer for PSK.  
> Receive is easy.
> 
> However, I cannot transmit by connecting to the "audio 
> in" plug on the back of the rig.
> 
> Do I need to go directly through the microphone plug on 
> the front of the rig?  Do I need an external interface?
> 
> Thanks in advance,
> 
> Rick
> WO8L
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com http://lists.contesting.com/mailman/listinfo/tentec
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>