[TenTec] Pegsus and 962 PS

[Chris Robson]

After viewing the back of the Jupiter on the TT Web site I realized my 
"spare" TT PS was not going to work, my solution was to Cut the plug 
(didn't pain me a bit!)and standardize it to the ARRL standard plug 
format(commonly purchased at Radio Shack), and as soon as the JUP hit the 
table, I was wired to go. In my opinion, the 2 pin connector was a great 
change from the 4 pin. I made an adapter for my Omni 6+ a number of years 
ago and all my equipment is interchangeable. the Power off/on switch from 
the Corsair and earlier, were a weak point in power switching and was glad 
that the Omni series got away from that.
That's my 2 cents worth.

73, Chris KB3A

At 08:41 PM 1/3/2002, you wrote:
>  the Peg is here,  and
>guess what?  The input power connector on the Pegasus
>is two pin,  and the 962 has a 4 pin plug!!  So,  Ten Tec
>sells a nice 4 to 2 adapter for only $5;  not a big deal.