[TenTec] remotely operating a pegasus

AC5E@aol.com AC5E@aol.com
Tue, 4 Jun 2002 19:38:28 EDT


The problem is similar to a microphone that must be at some distance from a 
PA amplifier. The classic setup would be to step the mike down to a very low 
impedance, use well shielded cable, and then step it back up to the amps 
input impedance. That's two well shielded audio transformers and shielded 
cable. 
    If you get hum amplify the audio before the stepdown transformer so it 
will override the hum pickup. 

73  Pete Allen AC5E