[TenTec] Argonaut V

[aluscre]

I asked this same question at the Ten Tec both in Dayton and was given
two different answers.
I then had a follow up e-mail from Gary Barbour, AC4DL a Ten Tec VP
(Digital/DSP Engineering).
He said there would be a computer interface ability and asked what type
of things users would would want to do with this port.

What follows was my answer, please e-mail him if you have other
suggestions or would to like to re-enforce any of my suggestions
gbarbour@tentec.com--

My biggest use is for logging. It's a real must in contests and great
for everyday qso's.
I currently use LOGic VI by PDA
http://www.hosenose.com/radio/default.asp.
The software can also take a DX spot from DX Cluster and automatically
change radio's frequency to DX station's frequency.

So minimum requirements from radio:
1. Ability to send frequency and mode to computer interface
2. Ability to change radio frequency and mode from computer interface

Other features that would be good to have:
1. Ability to manage radio memories from computer
2. Ability to set-up scanning parameters from computer
3. Ability to key radio via computer (CW)
4. Ability to control push to talk as computer sound card acts as voice
keyer.



"James R. FitzSimons" wrote:

> Is there a logging interface for the Argonaut V?
> Jim W7ANF
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec

--
|--------------------------|
     Anthony A. Luscre
            K8ZT
        Stow, Ohio
|--------------------------|
    Visit My Website at
  http://www.qsl.net/k8zt
|--------------------------|