[TenTec] Pegasus Speaker

[Steve Ellington]

Two methods have been often proposed. One was to plug a set of amplified
computer speakers into the headphone jack and the other, which I did, was to
wire directly to the speaker leads inside the rig, unhooking the internal
speaker, and run the wire to an external speaker. Take care not to ground
either wire since they carry DC voltage. It's a very weird design.
Steve Ellington N4LQ.
----- Original Message -----
From: "NZ8J" <timcook at erinet.com>
To: <TenTec at contesting.com>
Sent: Thursday, March 14, 2002 7:45 PM
Subject: [TenTec] Pegasus Speaker


> Hi All,
> I know there was some discussion quite a while ago about the speaker
output
> on a Pegasus, but I can't seem to find it.  I would like to add a speaker
> output to be able to use a better station speaker.  I didn't get any
> schematics with the Pegasus, so would appreciate it if anyone has
performed
> this mod and would be willing to let me know how they did it...If I recall
> it wasn't all that involved.... Thanks in advance....
>
>
> Tim
> NZ8J
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>