[TenTec] RX-320 and Palm operation?

[Michael A. Newell, WB4HUC]

Visit http://wb4huc.home.texas.net/rx320

You'll need to obtain a serial cable, or
I think you can use your docking cradle
by using a null modem adapter at the
computer end, and plugging that into your
RX-320.

If I ever get around to finishing it, Version 2
is underway at:

http://wb4huc.home.texas.net/rx320/rx320v2.htm


--
Mike - WB4HUC
Austin, TX
http://wb4huc.home.texas.net


----- Original Message ----- 
From: "NZ8J" <timcook@erinet.com>
To: <TenTec@contesting.com>
Sent: Friday, March 29, 2002 4:52 PM
Subject: [TenTec] RX-320 and Palm operation?


> Hi,
> I have been looking at a software program for a Palm device that will run
> the RX-320 receiver. Seems like a neat way to take the RX-320 on camping
> trips etc. I don't have a Palm yet, but have a chance to get a Palm IIIxe
> and was wondering what I'll need to connect the two together. Does the
> serial cable from the cradle allow operation of the RX-320 through it, or
> will I need something different to make the serial connection?  Would
> appreciate hearing from anyone who has tried this setup...and how it
> works...
> 
> Thanks and 73's
> Tim
> NZ8J
> 
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>