[TenTec] QRP WITH OMNI VI
VE1BN@aol.com
VE1BN@aol.com
Mon, 6 May 2002 16:40:34 EDT
Hi Mark -
My OMNI 6+ at minimum power delivers about 2 watts. I feed a TT 1208
transverter with it at 5 watts, and pencil-marked the knob setting. It is
stable, meaning no variation (change) in output. I measured the output using
a Bird wattmeter into the 50 Ohm load.
Thought you might be wise to do the same, just to make sure of what your
rig's power output is at the minimum (anticlockwise) setting of the RF power
knob. Sure is better than guessing.
73 - Don ve1bn@aol.com