[TenTec] Panoramic stereo receive

[Mark Erbaugh]

The latest firmware update to the Timewave DSP599zx external DSP box offers
something similar. Once you select a center frequency, higher tones move to
one side and lower tones to the other.  Unfortunately the center frequency
in only selectable as 500 and 750. It would have been nicer if the
selections were say every 50 Hz so I could select 600 or 700.

While the demo clearly demonstates the movement from right to left as the
tone pitch changes, I would like to hear a demo with multiple tones
simultaneously.  I think that would more accurately show how this feature
would help reception.

73,
Mark

----- Original Message -----
From: "Ten-Tec Inc. Amateur Radio Sales" <sales@tentec.com>
To: <tentec@contesting.com>
Sent: Wednesday, May 15, 2002 17:17 PM
Subject: [TenTec] Panoramic stereo receive


> For an example of how Panoramic Stereo Receive on the Orion will
> work, have a look at www.tentec.com/panoramic.htm
>
> The .ZIP file includes an article by Doug Smith, KF6DX, and a 29
> second .WAV file with a demo of the technique.
>
> Panoramic stereo is designed for use with headphones, but you can
> still appreciate the effect with loudspeakers.
>
> Scott Robbins, W4PA
>
>
> -----------------------------------------------------------------
> Ten-Tec, Inc., 1185 Dolly Parton Pkwy, Sevierville, TN 37862 USA
>    Contact Mon-Fri Eastern: Office/Tech (865) 453-7172 9 am-5 pm.
>    Repair (865) 428-0364 8-4.  Sales (800) 833-7373 9 am-5:30 pm.
>    Fax (865) 428-4483 24 hrs.  Visit us at <http://www.tentec.com>
>
>    --->--->---> Please note: E-mail <sales@tentec.com> for sales
>    and general product info only.  We presently do not offer
>    repair, parts, or kit building tech support by electronic mail,
>    please telephone (865) 428-0364 or (865) 453-7172.
>
>    Ten-Tec manufactures amateur radio equipment, military and com-
>    mercial use HF radio equipment, custom aluminum and steel
>    enclosures and has an on-premises, fully equipped tool and die
>    facility supplying metal and plastic injection mold industries.
>    Potential tool and die, custom enclosure or communications
>    electronics customer?  Contact us with your needs.
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>