[TenTec] Pegasus line out

[Duane Grotophorst]

Rich, 

Are you using a mono wired cable or a stereo wired
cable from the Pegasus to the sound card? I have run
into some sound cards that don't work well at all if
the L&R line-in leads are tied together. If you use a
standard stereo wired jumper cable from the line out
jack of the Pegasus to the sound card there will be
200 ohms (according to the Pegasus schematic I have)
between the L&R inputs of the sound card, that maybe
enough to avoid the problem I have ocassionally seen
with L&R leads tied together with some sound cards. 

Duane
N9DG

--- Rich McCabe <rich@1967z28.com> wrote:
> Thanks for all the responses.
> 
> I think I am going to lose the sound card in the
> circuit first of all..
> 
> I am curious why Ten Tec uses a stereo phono plug?
> If I pull the plug half
> way out, I get about 20% more audio. But also pick
> up RF...
> 
> Almost like the Pegasus amp is straining to drive
> the speakers.
> 
> Rich
> 


__________________________________________________
Do You Yahoo!?
Yahoo! - Official partner of 2002 FIFA World Cup
http://fifaworldcup.yahoo.com