[TenTec] fast acting breakers

[KD5NWA]

Here is the specs of some breakers I bought for my Corsair, you might need
to change the current specs, these are really fast magnetic breakers similar
to the ones that Ten Tec puts in their power supplies.


Part Number: T11-1-20.0A-01-10A-V
Handle/Style: Paddle/Toggle
Number of Poles: Single Pole
Configurations: Series Circuit Breaker
Frequency - Hz: DC-50/60HZ
Delay: Fast DC-50/60 Hz
Cross Calibration: DC Circuit
Voltage: 32DC
Rated Current: 20.0amps
Handle Color: Black
Outer Hardware: Black Knurled Nut
Indicator Plate: Vertical Mount
Terminal Adapters: No 6-32 Screw Terminal Adapters
VDE approval and CE compliant

This is for the "fast" breaker.  If you want the "instant" breaker
substitute a "0" for the "1" after T11-.  If you want a nickle knurled nut
substitute "-11A" for "-10A-".  If you want an 18.0 amp breaker substitute
"-18.0A-" for "-20.0A-"

http://www.pocosales.com/

There is a minimum $25.00 order but since they cost about $9.00 each and you
need three of them, jut meet the minimum order.

Cecil
KD5NWA

-----Original Message-----
From: tentec-admin@contesting.com [mailto:tentec-admin@contesting.com]On
Behalf Of Paul DeWitte K9OT
Sent: Tuesday, November 05, 2002 7:16 AM
To: tentec@contesting.com
Subject: [TenTec] fast acting breakers


I am in the process of  standardizing all of my wiring between the power
supplies and radios so I can hook any radio to any power supply. I would
like to have a fast acting breaker in line since these are not Ten Tec
power supplies. Does anyone have 3 of them that they would like to part
with, or a source to obtain them? I am not sure of the model number but do
not want the slow trip model. I think there are 3 models instant, fast and
slow. Is the fast one the one that I need? Thanks 73 Paul K9OT




_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec