[TenTec] Jupiter software

[Mark Erbaugh]

Scott,

The Jupiter mode was added much more recently than the Pegasus mode (which
was in there from the beginning). The main use of the Jupiter mode is so
that you can use the front panel to control the radio and have a logging or
contest program get information from the radio. Many of these programs don't
'control' the Jupiter, they just get the freqency and mode.

Are you interested in being able to have it so you can control the Jupiter
from either the computer or the front panel at the same time?

Mark

----- Original Message -----
From: "Scott Johnson" <scott@wowpage.com>
To: <tentec@contesting.com>
Sent: Wednesday, October 09, 2002 12:48 PM
Subject: [TenTec] Jupiter software


> OK, here's a question I can't seem to find the answer to anywhere.  The
> Jupiter programmer's guide says that there are two modes for controlling
the
> radio.
>
> Pegasus emulation mode makes the Jupiter look like a Pegasus -- it uses
the
> Pegasus command set and DISABLES the front panel, while Jupiter mode uses
a
> separate Jupiter command set and DOES NOT DISABLE the front panel.
>
> Several people have written control software that takes advantage of
Pegasus
> mode.  Is there no oftware that uses Jupiter mode, so that I can retain
> front panel control and display?  If I wanted my front panel disabled, I
> would have bought a Pegasus and saved $300. :)
>
> I tried the Jupiter-specific version of PegasusPlus, but it too puts the
> radio in Pegasus mode.
>
> Anyone know about something I missed?  Any ideas appreciated.
>
>      Scott
>
> --
> Scott Johnson (scott@wowpage.com) (s.johnson@klotzdigital.com)
> ICQ: 30730876 ICBM: N33 45 50.6 W84 49 31.3 (+- 3dB)
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>