[TenTec] Omni-VI & Samlex SEC1223 Power Supply?
Mon, 21 Oct 2002 18:48:50 -0400
I had not heard of Samlex until your post. I went to their web page and
looked it over. I see where RadioDan has them for $99 which seems like a
I have one of the little MFJ's as can be seen here:
I have not found any RFI thus far at least on the ham bands. One time it
developed a hum and I found a bad solder joint inside which fixed it. It's
about half the size of the Samlex and close to the same weight and price. A
friend of mine has this same supply with meters. He has trouble with RF
getting into it.
These MFJ's do have a fan but it's fairly quiet. 73
Steve Ellington N4LQ.
----- Original Message -----
From: "Jeff Maass" <firstname.lastname@example.org>
Sent: Sunday, October 20, 2002 12:09 PM
Subject: [TenTec] Omni-VI & Samlex SEC1223 Power Supply?
> Is anyone using the combination above?
> I'm going to be using the Omni-VI on 160 meters at the PJ2T
> CQWW CW operation, and plan to use the Samlex SEC1223
> switching power supply to power it.
> I've heard good things about this supply being quiet, and it's
> rated sufficiently to handle the Omni-VI current requirements.
> Is it as quiet as I've heard? Any problems?
> Thanks & 73,
> Jeff Maass email@example.com Located near Columbus Ohio
> USPSA # L-1192 NROI/CRO Amateur Radio K8ND
> Maass' IPSC Resources: http://home.columbus.rr.com/jmaass/index.html
> Circleville USPSA/IPSC: http://home.columbus.rr.com/jmaass/pcsiipsc.htm
> TenTec mailing list