[TenTec] OMNI VI & CW-80

[Robert & Linda McGraw K4TAX]

First thoughts, with and SWR of less than 2.5:1, I wouldn't worry about it.
With the SWR being 2.5:1 you should have about 100 watts or so forward and
about 17 watts reflected.  At HF with reasonable coax this is nothing to
worry about.  Admittingly, I wouldn't want it to be any higher.  But to this
end, the Tentec PA design won't have any problems in handling the mismatch.
This is one thing that I like about Tentec radios PA circuits.


73
Bob, K4TAX


----- Original Message -----
From: "John Rippey" <w3uls at 3n.net>
To: <tentec at contesting.com>
Sent: Friday, August 01, 2003 1:27 PM
Subject: [TenTec] OMNI VI & CW-80


> I'm using an OMNI VI (Opt. 3) tied directly (no Transmatch) to a
RadioWorks
> Carolina Windom CW-80. The built-in meter shows an SWR of 2.0:1 or less on
> 80-10 meters except 2 1/2:1 on 30 meters. This seems extraordinary to me
> and I'm wondering if: (1) I need to use an outboard S-meter to get a true
> reading or (2) the CW-80 and OMNI VI go very well together. Also, I'm
> talking CW sub-bands only.
>
> Any comments?
>
> 73,
> John, W3ULS
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>