[TenTec] Omni 6 Clickless cw monitor mod?

[k4dlj at bellsouth.net]

Does anyone have the info on the CW Monitor mod mentioned in Pauls mod?? 
Thanks and 73 de Dave K4DLJ
> 
> From: "Paul Christensen, Esq." <w9ac at arrl.net>
> Date: 2003/12/10 Wed AM 09:01:16 EST
> To: <tentec at contesting.com>
> Subject: [TenTec] FS: Omni Six - Option 3 DSP
> 
> For Sale:
> 
> Omni Six modified to "Plus" with factory option 3 upgrade.  Beautiful
> condition - a solid "10" with no visible marks, wear or blemishes.   Facts
> about this Omni Six:
> 
> - Full output on all bands.
> - Works as expected with no glitches, unusual mannerisms, or needs for
> resets.
> - Rx input mod incorporates 1KW H.F. MicroSemi PIN diodes in the T/R
> circuit.  This improves the main-to-aux antenna isolation to better than 80
> dB (yes, really).
> - Transmit CW waveshape mod to the ALC circuit to improve rise/fall symmetry
> - Transmit BFO circuit crystals changed to temperature stable units from JAN
> which results in a clean and chirpless transmit CW signal.
> - CW monitor circuit mods for totally clickless and thump-free keying.
> - Receiver passband board modified per Ulrich Rhode with Hewlett-Packard
> glass PIN diodes.  Diode bias optimized.
> - With Manual and power cable but may need to secure a shipping carton from
> Ten-Tec.
> - Includes a full compliment of filters:
> 
> 6.3 MHz I.F.:
> 
> 2.4 kHz
> 1.8 kHz
> 500 Hz
> 250 Hz
> 
> 9 MHz IF.:
> 
> 2.4 kHz
> 500 Hz.
> 
> All mods professionally done.
> 
> Terms: $ 1750.00 + shipping F.O.B - Jacksonville.  Priority to those who
> wish to purchase the full set of filters.  Will reduce price accordingly if
> only select or no filters wanted.  As a point of price reference, Ten-Tec
> currently wants $1750.00 for a used Omni Six/ Option 3 with NO filters.
> 
> -Paul, W9AC
> 
> 
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>