[TenTec] Orion dimensions

[Jim Reid]

But,  you must leave added space above the Orion to
allow heat to escape through the many top cover vent
slots:  all along the top just aft of the front panel to allow
the heat generated by the display out;  another row of
vents across the "middle" or center of the top of the case,
and yet a row of wider vents at the rear of the top panel
allowing heat from the xmit components out.

I have left about 2 3/4" of clear space above my Orion for
hot air to circulate out and away.

Happy Holidays and 73,  Jim  KH7M
>
> While I wait for Santa to bring me my recently ordered Orion, I want
to
> redesign my operating desk.

> My Orion height is 6" including feet with the bail retracted and
> 7" with the bail extended.