[TenTec] OMNI V QRP MOD???

[Steve Baron - KB3MM]

My V has the 100K resistor repleaced
by a 10K.  DOn't remember any significant drop in output but a long time
ago.

----- Original Message ----- 
From: "Tony Martin W4FOA" <w4foa at comcast.net>
To: <tentec at contesting.com>
Sent: Monday, December 29, 2003 21:48
Subject: Re: [TenTec] OMNI V QRP MOD???


>
> ----- Original Message -----
> From: <OTAKEBI at aol.com>
> To: <tentec at contesting.com>
> Sent: Monday, December 29, 2003 3:35 PM
> Subject: [TenTec] OMNI V QRP MOD???
>
>
> > If any of you out on the list have done the QRP mode to their TT OMNI V
> could
> > you answer this question.
> > I have a radio that had the mod done before I bought it.
> > The 100k rist. was changed to a 5k rist.
> > I noticed that the top end of the power output was low so I went in and
> > adjusted the ALC pot in the radio.
> > I had to crank it full open to get 95 watts output on 20 meters.
> > It was driving me crazy until I got a hold of the first owner and he
told
> me
> > he had done the mod.
> > If anyone out their has also done this mod could you tell me if your ALC
> pot
> > had to be adjusted full open to increase top end output after the mod
was
> > completed?
> > I don't want to change the 100k back to a 5k but I do want to make some
> notes
> > in the manual for if I decide to change it back.
> > Thanks,
> > Dan N4VET
> > _______________________________________________
> > TenTec mailing list
> > TenTec at contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>