[TenTec] confused re Corsair II VFO jumper

[Jim Reid]

> Anyway - I put a RCA cable across the VFO in /out for 
> a jumper - Can somebody explain to me what I'm doing
> wrong? 

Hi Tim,  so far,  so good.  Now you must put in one more 
jumper.  At the socket into which the external VFO plug
was to go,  you need to jumper pins 2 and 6.  Pin 2 has +12 volts
on it,  and pin 6 "enables" the Corsair II when that "reg." 12 v
is put on it.  Without the external VFO,  you must provide
that voltage using that jumper.  Just use a small piece
of hook-up wire.  Solid wire works better than stranded,  hi.

73,  Jim  KH7M