[TenTec] confused re Corsair II VFO jumper

[Vernon J. Kunes, Jr.]

There is a 9 pin Accesory socket in the back. There is a jumper plug with 2
pins shorted (I don't remember which 2). This has to be in place in order to
make the Corsair II work. You can get one from Ten Tec. Hope this helps.
Vern  N2YZS
----- Original Message -----
From: <tlogan7 at cox.net>
To: <tentec at contesting.com>
Sent: Monday, February 10, 2003 8:55 PM
Subject: [TenTec] confused re Corsair II VFO jumper


> Hi folks -
> This is probably going to be extremely embarassing but here goes. I have
not
> turned on my Corsair II since selling the external VFO (shouldn't have).
> Anyway - I put a RCA cable across the VFO in /out for a jumper - and I am
> getting 9.000 or 91.000 on the freq readout as if it's still looking for
the
> external VFO. The tuner dial will not function - as if it's waiting for
> control from the external VFO. Can somebody explain to me what I'm doing
> wrong? Thanks and try not to laugh too hysterically. 73/Tim
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>