[TenTec] Re: Ten Tec's input re 1.8 filter

[tlogan7 at cox.net]

Thanks everyone for continued good suggestions. I called TT from work today. Paul said to check to make sure diodes D9 and D10 are not shorted and then check voltage on the connectors in the upper left. I  will also check traces underneath and generally for any loose connections. If that doesn't work he says they would need the whole rig sent - not just the PBT board. Rats - they are looking at my Corsair now - so I may be without a rig if I can't fix it. I could go through withdrawal!! I'll check tonite when I get home and cross my fingers.
73/Tim NZ7C
> 
> From: VE1BN at aol.com
> Date: 2003/02/28 Fri AM 11:06:46 EST
> To: tentec at contesting.com
> Subject: Re: [TenTec] Tested: 1.8 filter definitely not engaging, ideas?
> 
> Tim -
> 
> Have you checked the underside of the board?  Maybe 
> there is a broken trace or bad soldered joint at the filter 
> sockets.  Had that problem in my brand new OMNI 6+.
> 
> Worth taking a look see.
> 
> 73 -  Don,   VE1BN at aol.com
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>