[TenTec] 2 transciever to 1 amp ?

[Chester]

Gary,

	That I know of there is no product that will do this. I built up
a wafer switch that would let me switch from my Omni 6 to my Corsair II,
and then throw a 1x2 antenna switch to the rig I wanted to use. The
unused antenna (drive) port was terminated to a 50 ohm load. You just
have to decide which connection lines you want to switch, draw up your
own schematic, and then wire up the switch. You must also make sure you
have the drive set correct on both radios. It worked just fine until I
lost my brain cell and sold my Corsair II.

Tom/W4BQF

Chester Alderman
calderman@cox.net

-----Original Message-----
From: tentec-admin@contesting.com [mailto:tentec-admin@contesting.com]
On Behalf Of AB9M@aol.com
Sent: Saturday, January 04, 2003 10:09 PM
To: tentec@contesting.com
Subject: [TenTec] 2 transciever to 1 amp ?

Anyone have a schematic or product that will let me drive my Titan 425,
QSK 
with either my OMNI IV+ OR my Corsair II while protecting the standby
radio 
if "AUX" antenna is used on both?

Gary Huber - AB9M@aol.com
Webmaster for <A
HREF="www.societyofthefifthdivision.com">www.societyofthefifthdivision.c
om</A> 
Webpage <A
HREF="http://www.societyofthefifthdivision.com/Webmaster.htm">http://www
.societyofthefifthdivision.com/Webmaster.htm</A> 


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
---
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec