[TenTec] Corsair

Thu Jul 17 10:33:56 EDT 2003

You might be able to de-gunk the Corsair by submerging the whole radio in a
vat of kerosene for several months.  Otherwise the only way to do it
properly is to dismantle the PTO.

It is possible to remove the PTO without removing the front panel.  Set the
rig on its heatsink and remove the main tuning knob and dial skirt.  Within
the hole thus exposed, one can remove the two screws that hold the PTO in
place.  Be sure to make note of the wire connections to the PTO before you
unsolder those wires.

Follow the instructions provided by Ten-Tec for dismantling and reassembling
the PTO.

73, Mike N4NT

----- Original Message ----- 
From: "Malcolm McLeman" <malcolm.mcleman at free.fr>
To: <tentec at contesting.com>
Sent: Thursday, July 17, 2003 12:17 AM
Subject: [TenTec] Corsair

> Gentlemen and not forgetting the ladies,
>
> I have inadvertently deleted my reflector files on recent de-gunging of
> Corsair dial without dismantling. I do not recollect reading if this can
be
> done successfully, can anyone enlighten me if it is possible and what is
the
> modus operandi?
> 2. I have been informed by M3VTC (United Kingdom's foundation licence 10w
> all modes) that he will very soon be transitting to G1VTC 100W all modes
> without the need for a CW test. A landmark indeed in our wonderful hobby..
>
> Malcolm F5VBU/GM3UIN
>
> NNNN
>
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec