[TenTec] Argonaut V LSB Annunciator

[J. D.]

The RIT light does not come on, even if the RIT button is depressed, until
you actually turn the multi knob and have the receiver frequency different
from the xmit frequency.  My LSB light does come on when in that mode with
v1.07. 
 
-------Original Message-------
 
From: tentec at contesting.com
Date: Tuesday, July 22, 2003 10:48:33 PM
To: tentec at contesting.com
Subject: Re: [TenTec] Argonaut V LSB Annunciator
 
I have the same problem since upgrading my Argo 5 to v1.07
 
Don / WA9TGT
----- Original Message ----- 
From: Michael Melland 
To: tentec at contesting.com 
Sent: Tuesday, July 22, 2003 8:34 PM
Subject: [TenTec] Argonaut V LSB Annunciator
 
 
Have any of you with an Argonaut V that has the latest v 1.07 software
noticed if your lsb and rit annunciators still light after the upgrade ?
Mine works FB as usual but just noticed the lsb annunciator and rit
annunciator dont light when in that mode ? Master reset doesn't fix it....
worked before with 1.04 but ???
 
Mike
--
Michael Melland, W9WIS
Winneconne, Wisconsin USA EN54pc
qrp-l #1656 - qrparci # 9875 - iparc #252
ars #1075 - http://webpages.charter.net/w9wis/
 
 
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
 
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
.