[TenTec] Need Help.

[denton]

Have the same here and usually a ground loop or rf feedback of some kind.
Try feeding the rig to a dummy load and see what happens.
Also, max power out reading via the Pegs interface is not all that accurate
----- Original Message -----
From: "Ernest Mills" <emills at nycap.rr.com>
To: "(GR) TenTec Contesting" <tentec at contesting.com>
Sent: Monday, June 09, 2003 5:26 PM
Subject: [TenTec] Need Help.


> I'm using a Pegasus 550 with internal LDG PT-11 Auto Tuner.   N4PY
software ver: 2.08 with DSP ver: 1.190.
> Not used rig for about 2 months.
>
> With Autotune on: Internal tuner enabled. Tuner fold back power set to 23w
> 40m relays chatter. ends up with about SWR of 1.8
> 20m no ALC light on when it tunes, No output Power on meter, No reading on
SWR
> 15m same as 40m above.
> 10m same as 40m with SWR ending at 1.2
>
> Does this sound like a faulty RIG or Tuner on 20 meters?
>
>     Pulling my hair out..... thanks for any help.  73 Ernie
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>