[TenTec] Need Omni 6+ help

[AG2A]

I have both problems, but never have switched from 75 to 40 on LSB (don't 
operate 75).I really didn't notice what caused the freq change...but 
cycling power on.off always clears it.
If you get any other answers with explanation,please forward them.

                                 Thanks,
                                         Tom - AG2A
         .


At 08:47 AM 5/4/2003, you wrote:
>Hello all, Has anyone ever had a glitch in their Omni 6+ where you
>switch from 75m LSB to 40m LSB by directly entering the frequency,
>and you come out approx 700hz high on recieve from what the display
>reads. Hitting the PTT or changing the mode settings has no effect
>on aligning the recieve freq, but when I cycle the power switch off
>and on, then the recieve freq and the display align and are right on.
>Also, Does the NB actually do anything? Mine never seems to have
>any effect on cars driving by or power line type noise. Any help is
>appreciated. 73's  Todd
>
>
>
>
>
>_________________________________________________________________
>MSN 8 with e-mail virus protection service: 2 months FREE*
>http://join.msn.com/?page=features/virus
>
>_______________________________________________
>TenTec mailing list
>TenTec at contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec