[TenTec] Orion and MIKEs

[ac5e at comcast.net]

One of these days I'm going to have to take a stock 705 mike plug apart and see how they are wired. I'm using a stock '05 I bought in 1989, a much modified 1201 (705 in kit form) for the various Heil's around the shack, a late model 705, a Turner and a Shure 55 wired according to the Omni VI+ manual, and they all get great audio reports. And I have had an EV 620 on line as well. Not at the same settings by any means, but great audio reports none the less. So I'm a little puzzled. 

My 75 Meter dipole runs directly over the shack, about 25 feet over the Orion, and even with the Alpha at 1500 W I get no reports of RF in the audio, either. I don't know why - but all favors are gratefully accepted. 

73  Pete Allen  AC5E

> Not really,
> 
> My Icom 775DSP has to have the shield tied to the mike plug casing.... A
> similar notice is on the Icom's website
> 
> Ron....NU1U 
> 
> -----Original Message-----
> From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
> On Behalf Of Kc9cdt at aol.com
> Sent: Thursday, November 13, 2003 19:16
> To: tentec at contesting.com
> Subject: Re: [TenTec] Orion and MIKEs
> 
> John,
> If this is an issur TT better be changing the radios. Especially for ORION @
> $3300.00
> 
> Lee
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec