[TenTec] CAT strings from OMNI VI+

[Carl Moreschi]

This mode is called matrix mode.  It causes the frequency and mode to be
sent by the radio when either of these values change.  With a control code
of 0, the frequency is sent in the message.  With a control code of 1, the
mode is sent in the message.  The formats should be similar to the response
for a frequency request or a mode request sent in from the PC.

Carl Moreschi N4PY
Franklinton, NC
----- Original Message -----
From: "David W LeJeune" <lejeuned at centurytel.net>
To: <tentec at contesting.com>
Sent: Sunday, November 30, 2003 3:35 AM
Subject: [TenTec] CAT strings from OMNI VI+


> Anyone know what the format is for the response string from the OMNI VI+
CAT
> port when the Continuous Data Echo mode is enabled (Menu 2 - CdE).
Appears
> to be two types - with a 0 or 1 in the Command Echo byte, but these are
not
> documented in my OMNI VI+ documentation.  With a 0 in the command echo
byte,
> the frequency along with other information is there.
>
> Dave (K5WNV)
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec