[TenTec] Omni 6+ question

[Steve Baron - KB3MM]

See the ARRL test for the 2000 - contains a list of rigs including the VI

>From July 2001 Product review for the Kenwood 2000.

Table 2

Dynamic Range Measurements at
5 kHz Spacing for Several Current
HF Transceivers

   5 kHz Dynamic Range (dB)

Transceiver  Blocking   IMD

Elecraft K2   126    88
ICOM IC-706MKIIG   86    74
ICOM IC-746    88   78
ICOM IC-756PRO  104   80
ICOM IC-775DSP  104   77
Kenwood TS-570D   87   72
Kenwood TS-2000   99    67
Ten-Tec Omni 6+  119    86
Yaesu FT-847   82   73
Yaesu Mark-V FT-1000MP 106   78

----- Original Message ----- 
From: <KD7EFQ at aol.com>
To: <tentec at contesting.com>
Sent: Wednesday, October 01, 2003 21:12
Subject: [TenTec] Omni 6+ question


> I have been doing some comparisons of Third order intercept numbers on QST
reviews, but The manual for the 6+ and the QST numbers on the Omni 6+ just
say +12db T.O.I. but does not say if it is measured at 20khz spacing or 5khz
spacing, and I would like to know, as another brand is showing as high as
+17 db T.O.I. at 20khz spacing but it falls to +2 at 5khz. If the 6+ rating
is at 20khz, does anyone know what it is at 5khz? Thanks. 73 Todd
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>