[TenTec] PSK and Argo V help?

[J. D.]

 =0D
What kind of a circuit are you using to key the rig?  Also which are you
using to actually activate the keying circuit to key the radio - the RTS =
or
the DTR?=0D
=0D
Duffy=0D
=0D
 =0D
-------Original Message-------=0D
 =0D
From: tentec at contesting.com=0D
Date: Sunday, October 05, 2003 1:28:47 AM=0D
To: TenTec List (E-mail)=0D
Subject: [TenTec] PSK and Argo V help?=0D
 =0D
I'm attempting to get my Argo V on the air with PSK31. I have connected t=
he=0D
Auxiliary cable to the sound card and I'm copying PSK without difficulty.=
 I=0D
also have the rig connected to the PC via a serial cable (COM3).=0D
 =0D
My problem is getting the PTT to function using the serial RTS/DTR mode.=0D
The software indicates that the appropriate tones are being generated but=
=0D
there's no RF unless I manually hit my foot switch and activate the PTT.=0D
The software (PSK31 Deluxe) is set for PTT via the COM3 RTS/DTR lines.=0D
 =0D
I've tried the VOX route but I haven't found the settings that avoid a=0D
"choppy" signal.=0D
 =0D
Any insight would be appreciated. Thanks.=0D
 =0D
73,=0D
 =0D
Rick=0D
VE7ASR=0D
 =0D
Web site: http://www3.telus.net/ve7asr=0D
 =0D
_______________________________________________=0D
TenTec mailing list=0D
TenTec at contesting.com=0D
http://lists.contesting.com/mailman/listinfo/tentec=0D
=2E=20