[TenTec] big Orion problem

[Ron Martin]

S/N 06C10573

-----Original Message-----
From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
On Behalf Of Jason Buchanan
Sent: Saturday, October 18, 2003 13:12
To: tentec at contesting.com
Subject: Re: [TenTec] big Orion problem





What serial numbers do you guys have?

Sounds like differences in hardware..........




73 - Jason W0JSB



Ron Martin wrote:

> Just For The Record, mine is working as described below..  Prior to 
> the upgrade, the radio ran smooth as silk.  Upgrade resulted in 
> problems.
> 
> -----Original Message-----
> From: tentec-bounces at contesting.com 
> [mailto:tentec-bounces at contesting.com]
> On Behalf Of Grant Youngman
> Sent: Saturday, October 18, 2003 09:05
> To: tentec at contesting.com
> Subject: RE: [TenTec] big Orion problem
> 
> 
> Just for the record, mine has been working smooth as silk since the
> upgrade with no problems.
> 
> Grant/NQ5T
> 
> 
>>I upgraded, did all of the resets, and the darn thing randomly fails. 
>>The random failure on turn on is that it either comes up locked up
> 
> and
> 
>>transmitting or is locked up.
>>
>>Went through the resets again (and again and again, etc.),
> 
> sometimes
> 
>>comes up running correctly or the darn thing is locked out.
>>
>>Had no problems like this prior to the upgrade.....
>>
>>
>>Ron ....... NU1U
>>
>>-----Original Message-----
>>From: tentec-bounces at contesting.com
>>[mailto:tentec-bounces at contesting.com] On Behalf Of jack Sent:
> 
> Friday,
> 
>>October 17, 2003 16:21 To: tentec at contesting.com Subject:
> 
> [TenTec] big
> 
>>Orion problem
>>
>>
>>i downloaded and updated my Orion to 1.363 ...then did a RESET
> 
> with
> 
>>MAIN RX/TX ...the frequency is 14.250 USB but NONE of the
> 
> knobs
> 
>>buttons works ...
>>
>>called Ten Tec ...redo the update was the suggestion ...
>>
>>update again using Com2 this time ...with all other software shut
> 
> down
> 
>>and after rebooting the computer (running WinXP) same result
>>
>>NO AUDIO tho the S-meter kicks from noise or signal ...again
> 
> none of
> 
>>the buttons/knobs work except the power switch and booting with
> 
> either
> 
>>MAIN RX/TX or VFOB LCK ...still no audio or anything else
>>
>>any suggestions?
>>
>>jack ak7o
>>
>>_______________________________________________
>>TenTec mailing list
>>TenTec at contesting.com
>>http://lists.contesting.com/mailman/listinfo/tentec
>>
>>
>>_______________________________________________
>>TenTec mailing list
>>TenTec at contesting.com
>>http://lists.contesting.com/mailman/listinfo/tentec
> 
> 
> 
> 
> -------------------------------
> Grant Youngman /NQ5T
> http://www.globeking.com
> nq5t at comcast.net < == NEW
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com 
> http://lists.contesting.com/mailman/listinfo/tentec
> 
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com 
> http://lists.contesting.com/mailman/listinfo/tentec



_______________________________________________
TenTec mailing list
TenTec at contesting.com http://lists.contesting.com/mailman/listinfo/tentec