[TenTec] rohn 25

[John/K4WJ]

After seeing this message I've had enough. This message should have been 
posted on an appropriate reflector and not this one. I guess the person 
posting this message didn't want to take the time to post it to the correct 
venue. He got his answer here so why should he exert himself posting to the 
correct reflector?

I'm going to give my delete key a rest and leave this reflector.

If someone wants to start a "TenTec" reflector, let me know. You can reach 
me at k4wj at arrl.net

73..de John/K4WJ

At 02:47 PM 10/18/03, ??, electrical engineer wrote:
>I just took a machinist's scale out and checked my Rohn 25. As I
>remembered, there are two bolts per leg, the upper bolt is 1/4-28 x
>1-3/4" grade 5 hot dipped galvanized. The lower bolt is 5/16-24 x 1-3/4"
>grade 5 hot dipped galvanized. Partially threaded with grade 5 hot
>dipped galvanized nuts to match. Zinc plate doesn't stand up to weather
>nearly as well.
>
>73, Jerry,