VS: [TenTec] Crimpers

[elstar-mt]

Hi Vince

Crimping is good idea as well silver plated soldering model too as it's easy
to
sold , but on crimping you must have good tool.
Usually below USD 50 level tools are not very strong. U.S tool on long arms
is perfect as well some other professional models.

Usually connector must be like Kings USA is producing: PTFE / silver and
easy to sold or
just use otherwise CRIMP model. Well  NEW clean Amphenol on ceramic
insulator is
good as well.

I recommend piece of shield tube , which has glue inside and will be
shrinked down to -66%.
I think ½ "  is std and relevant for  RG213 / RG8U connectors.


Rgds; Mark OH3LX.


-----Alkuperäinen viesti-----
Lähettäjä: tentec-bounces at contesting.com
[mailto:tentec-bounces at contesting.com]Puolesta Vin Santis
Lähetetty: 24. lokakuuta 2003 17:57
Vastaanottaja: QRP List (E-mail)
Kopio: Tentec (E-mail)
Aihe: [TenTec] Crimpers


Hi,

Does anyone use a crimping tool for PL-259 connectors? If so, what has your
experience been and what crimper would you suggest?

Thanks,

Vince Santis, N1VS
Winsted, CT
vsantis at earthlink.net


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.530 / Virus Database: 325 - Release Date: 10/22/03


_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec