[TenTec] increasing audio output

[Jim Miller WB5OXQ]

If your sound input on your pc has a mic input try using that instead of the
line in.
----- Original Message ----- 
From: "Richard Hemingway" <rheming1 at sbcglobal.net>
To: <tentec at contesting.com>
Sent: Saturday, April 03, 2004 9:45 AM
Subject: [TenTec] increasing audio output


> I am running MultiMode with the Orion.  No problem on PSK but when I
> try to run CW on TX it seems that one of the problems is that the
> audio output from the Orion to the computer should be increased.
>
> I am using the AUX cable, pin 4, which is the left side output - into
> the computer.  I am using an Apple G5 running Panther and have the
> input volume all the way up.
>
> This is strange in that I have no problem reading even the faint RX
> on PSK with the computer volume up only about 75%.  When I try to
> read CW I don't even have garbage on the screen.
>
> Thanks,
>
> Dick, N5XRD
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>