[TenTec] Orion Interfacing

George Skoubis george.skoubis at verizon.net
Wed Apr 7 01:45:40 EDT 2004


Hi,
 
  I just received my Orion Monday and have been interfacing it with my
main computer and have a question for you guys…
 
  I would like to hook up my PTT/CW/FSK interface (home brew with
opto’s) to the AUX I/O jack and have the rig ready for any mode.  I like
to operate RTTY using FSK and have found a small problem and was
wondering how the rest of you have solved it.
 
 Here is how I have my connections to my interface made currently; the
PTT (Pin 3) is used for PTT in SSB and FSK modes.  I use a foot switch
so I use a Y cable to connect the foot switch to the interface PTT, the
FSK goes to pin 7, audio out (from soundcard) to pin 1, left audio out
pin 4 (to left soundcard channel), right audio out pin 6 (to right sound
card channel), and pin 2 to ground.
 
  The only thing missing is a way to connect the CW jack from my
interface to Pin 3 when I’m in CW mode.  I could use a switch and
manually select whether Pin3 connects to the CW jack on the interface or
the footswitch/PTT from interface combo.  
 
  Does anyone else have an automatic solution or does everyone use a
switch or manually swap cables?
 
Thanks,
 
George / KF9YR
 

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.651 / Virus Database: 417 - Release Date: 4/5/2004
 


More information about the TenTec mailing list