[RE: [TenTec] RFI and Orion ]

[Michael Goins]

Tell me more aobut the monster balun.

mike
k5wmg

"NJ0IP" <Rick at dj0ip.de> wrote:

Scott, you need to read and heed Bob's (K4TAX) previous post.  Dump the
Windom, feed an 80m dipole with openwire through a simple Monster Balun
(which Bob can explain to you) thru the 238 and you will cream the bands
instead of your environment.

I'm on the third floor here so no hope for a good RF ground, yet my openwire
fed antennas don't put unwanted RF into the shack.

73
Rick

-----Original Message-----
From: tentec-bounces at contesting.com
[mailto:tentec-bounces at contesting.com]On Behalf Of Ten-Tec Inc. Amateur
Radio Sales
Sent: Thursday, April 22, 2004 12:41 PM
To: tentec at contesting.com
Subject: Re: [TenTec] RFI and Orion


Acutally, most of the problems we have seen with distorted audio on
the Orion are from not separating mic ground and RF ground on the
microphone input.

Every amateur radio installation is unique.

My main antenna at home is a 80/40 Windom, less than 100 feet from
my house.  2nd floor ham shack, no RF ground.  At 1500 watts, I set
off the carbon monoxide detector, tear up the television and cream
the phone line.  No problem with the radio.

The Orion is no more susceptible to RFI than any other transceiver is.

73
Scott Robbins
W4PA



_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec