[TenTec] Can Iambic be used as single Paddle
K4IA at aol.com
K4IA at aol.com
Mon Apr 26 08:15:19 EDT 2004
Question really is: "Does a double paddle have to be used in iambic mode?"
No.
I use a double paddle but not in iambic mode. I cannot master the squeeze
technique either. I had used a bug so I was accustomed to the back and forth
motion and automatic dots. You just push one lever at a time. It didn't take
long to get the hang of sending dashes with the keyer.
Use your 407B and trade up to one of the super-paddles when you get the urge:
March, Begali, Profi. Join FISTS www.fists.org
My Orion (and Yaesu) will not allow me to use the internal keyer and an
outboard keyer at the same time. The outboard keyer sends actual dots and dashes
to the internal keyer instead of "left and rights" so the internal keyer
outputs garbage. So, you must turn off the internal keyer. This would be an issue
if you are using a computer to generate CW during a contest and want to also
plug in paddles so you can send something other than the preprogrammed
exchanges. You need to put the paddles on their own keyer. The pico-keyer is a
minimalist kit that will do the job for under $20.
Radio k4ia
"Buck"
Fredericksburg, Virginia USA
More information about the TenTec
mailing list