[TenTec] grounding dipoles

[N0KHQ at aol.com]

Running multiple dipoles from a single feed line is pretty well documented in 
most antenna handbooks. You dont need and dont want 4 separate feed lines 
going to the array.

No matter what your doing with a diploe/s you will want to install a 1:1 bal 
to unbal current balun at the feed point. The balun is available from Radio 
Works. Or, find an FT-240-61 toroid and wind it with about 12 turns of RG-58U-PE 
coax, 6 turns on one side and 6 turns on the other side. I am attaching a 
.jpg drawing for your use as to what the end product should look like when 
completed. The design is not mine.

Have Fun

73
John / N0KHQ / St. Louis

Always on 18.130

Antennas:

You can build 'em better than you can buy 'em
Please visit the sites below:
http://www.hamuniverse.com/antennas.html
http://www.cebik.com/n0khq.html
http://www.ssb-audio.com/forum/