[TenTec] TT 236 cable
John Rader
k5xtx at hotmail.com
Sun Aug 29 22:21:55 EDT 2004
>What is a TT 311? I haven't found it listed on unofficial or official TT
>sites.
The TT 311 is a band data converter for the 253/420 to be auto switched with
the Orion. It has LED indicators for the band selected. 10m/12m and 15m/17m
are combined, but 60m has it's own LED/position.
>By "properly bypasses >60m" do you mean bypasses the Hercules to prevent
>exceeding 100 W >ERP on 60 Meters?
I was thinking about rewiring the cable or 311 to seperate 15m/17m when I
discovered the cable I had (Riley's) was missing the 4-6.5mHz wire. I didn't
realize the Herc II even had a 4-6.5mHz band. So when I would auto switch to
60m the 311 would indicate 60m but the 253 would retain the previous band's
tuned setting, instead of going into the pre-programmed bypass of the tuner
circuit.
>With >a -7dB gain (7 dB loss) antenna, 500 watts would still be only 100 W
> >ERP.
I need to figure the loss on my 60m loaded vertical, so I am running
conservative with 50 watts.
John K5XTX
_________________________________________________________________
Is your PC infected? Get a FREE online computer virus scan from McAfee®
Security. http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
More information about the TenTec
mailing list