[TenTec] RE:[Ten Tec] Orion "Ram" Clear

[Gary Tuck]

You hold down the VFO B Lck button while turning on the rig.  Look on 
the firmware upgrade ( http://www.rfsquared.com/Orion/orionmain.htm ) 
page under heading
HELP! RADIO SCREEN BLANK AFTER UPDATE.   I was getting some quirky 
behavior after doing the 1.372 update and even after a master restart, 
so I did the Ram-clear and cleared all settings.  I then did another 
Master Reset and put in all settings again by hand.  Everything seemed 
to work OK except I've discovered that the Keyer seems stuck in Mode A.