[TenTec] Omni V , aux relay

[Rick Westerman]

Lowell,

You can turn the relay "On" or "Off" in the software menu.
It is probably turned off and only needs to be turned on.
I don't have an Omni V anymore so you'll have to check in the
handbook for the menu setting that controls this.

73
Rick


-----Original Message-----
From: tentec-bounces at contesting.com
[mailto:tentec-bounces at contesting.com]On Behalf Of Lowell
Schroeder
Sent: Sunday, February 15, 2004 3:54 PM
To: tentec at contesting.com
Subject: [TenTec] Omni V , aux relay


Greetings;
I recently purchased an Omni V.  In checking it out I noticed the
aux
relay to  control an external amp or what
ever, is not working. Looking at the board and it appears the
relay
itself is not open.  I suspect the transistor
that keys that relay.  Has anyone else had this problem?  I love
the rig
otherwise, the readout and the receiver
are excellent, and I have  had good reports on the audio. Thanks
in
advance  for comments or advice.
73  Lowell  W9KIR

_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec