[TenTec] ORION and USB/COM adapter ?

[Paul Henning]

Try a white paint stick to highlight the number on the connector shell. Or
try colored tape following the standard rest. Color code. Or file a small
notch into the edge of connector shell 1, two into shell 2 etc. Then you can
terminate the cables by feel. Does not seem any more of a problem then
trying to read the labels on the rear of the typical computer!

Paul N. Henning
K9PH
Director of Research and Development
Amtelco
4800 Curtin Drive
McFarland, Wisconsin 53558
www.amtelco.com
paul at amtelco.com
(608)838-4194


-----Original Message-----
From: ac5e at comcast.net [mailto:ac5e at comcast.net] 
Sent: Friday, February 20, 2004 2:52 PM
To: tentec at contesting.com
Subject: Re: [TenTec] ORION and USB/COM adapter ?

The real problem with my serial card is the octopus cable. One plug to the
card, four DB9's to the accessories - and the numbers are very hard to see
in bright light. In near total darkness it has been easier to play eenie
meenie miney and there's moe at last with the device driver than to try to
figure out just which port you are attached to. However, since I only have
one option left the next time should not be a problem.

73  Pete Allen  AC5E
> Pete,
> 
> I don't know if it would help, but I made up a map of the ports on the
back
> of my computer and taped it to the top of the computer. That way when I
lean
> over the top to plug something in, I can find the right hole without
having
> much access to the back. I found it especially helpful with the soundcard
> jacks.
> 
> I noticed that TenTec did something similar. They made up a map of the
> connections on the back of the Omni VI and include it in the manual.  You
> simply lay the card on the top of the Omni VI and can figure out which
jack
> is which leaning over the radio.
> 
> Mark
> 
> ----- Original Message ----- 
> From: <ac5e at comcast.net>
> To: <dh0ghu at dh0ghu.de>; <tentec at contesting.com>
> Sent: Thursday, February 19, 2004 2:54 PM
> Subject: Re: [TenTec] ORION and USB/COM adapter ?
> 
> 
> > Hi Ulrich: my combination of Orion, XP Home, and a SIIG serial card
seems
> to work well for me. Everything has worked as it should - although trying
to

> figure out which of those look-alike-in-the-black-hole-behind-the-computer
> ports I just connected to can be a bit of a puzzler.
> >
> > I did have to change my old parallel keyer to a serial keyer - no real
> problem but I invented a whole new profane language before I gave up on my
> ancient parallel keyer and XP.
> >
> > 73  and enjoy the Orion  Pete Allen  AC5E
> > _______________________________________________
> > TenTec mailing list
> > TenTec at contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec