[TenTec] A test of Orion's external CW keying

Sinisa Hristov shristov at ptt.yu
Thu Feb 26 23:37:37 EST 2004


K3BU at aol.com wrote:

> I wonder about your S (power) meter readings. I have found discrepancy on my 
>  Orion between power setting and meter reading. Seems that real output power 
>  corresponds to the encoder setting in the menu. Orion meter reading is off.

Yes, I've also found power setting accurate and meter way off.

But this time I observed meter continually fluctuating
between readings of 0, 15 and 60 W, while the actual RF
output did not fluctuate at all. Power was set to 40 W.


> Did you have a closer look at the leading edge of the first dit and see if 
>  there is high power spike.

I didn't investigate this thorougly but I did observe
some peaks and some strange oscillations on the leading edge.
Peaks were much below full power. 
Scope dumps sent to you in another email.


73,

Sinisa  YT1NT, VA3TTN




More information about the TenTec mailing list