[TenTec] Remotely controlling my Jupiter

[David W LeJeune]

I use Microsoft's Net Meeting (assuming you're using windows).  Works OK,
but setting the mic gain and volume control on both sides is a bear. Finally
had to bring the laptop into the shack and adjust side by side.  After that
seems to work pretty good.  I have a control program that sorta like the
TenTec supplied software interfaces that works client/server like, with a
TCP connection between the remote and the contol computer.  If you'd like
I'll send you a copy to try.

Dave K5WNV

-----Original Message-----
From: tentec-bounces at contesting.com
[mailto:tentec-bounces at contesting.com]On Behalf Of Mike Donovan (Donovan
Photos)
Sent: Thursday, January 01, 2004 2:17 PM
To: TenTec at contesting.com
Subject: [TenTec] Remotely controlling my Jupiter


I am running my Jupiter using Carl's programme, N4PY.  I can remotely
control the radio  via realvnc on my network, but I am unable to get remote
audio working so that I can hear the radio....so that limits me to digital
modes only.  I have tried to get AUDIOLINK working but to no avail.  Is
there any really good program that will allow me to run audio over my
inhouse lan so I can use my TenTec radio anywhere in the house.?
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec