[TenTec] OMNI VI & 1210 2M Transverter

[Ben K8DIT]

Dennis,

You need to have a watt meter that you can depend on. The available third
party wattmeters are only as accurate as they claim to be. So, underpower
your first transmissions and let the relative readings begin. Your xvrtr's
input resistors will heat up as you pour the juice to it. So either dont get
them hot or put a bigger resistor in there. At 12o'clock the power control
on the Omni 6 gives me about 10 to 20 watts out as I measure it. YMMV.