[TenTec] Re: Jupiter Reverse Polarity

[doc]

Had I a tender ego this Jupiter thing would really have done
a job on me:

1.  First I reverse polarity and damage the rig,

2.  Then I have a hard time diagnosing the damage,

3.  Then I had a real hard time removing the transistors
and reinserting the replacements,

4.  And now I cannot find the #17 connector for the speaker!

Where did they hide that thing, please?

Thanks! & 73, doc kd4e

Rick Williams wrote:
> Doc before I forget.  Q1 and Q2 are not labelled on the board but they are
> the 2 transistors adjacent to connectors 1 and 13.  See attached photo.
> 
> Good luck.
> 
> Rick
> 
> -----Original Message-----
> From: doc [mailto:kd4e at verizon.net]
> Sent: June 29, 2004 08:08
> To: Rick Williams
> Subject: Re: Jupiter Reverse Polarity
> 
> 
> Rick Williams wrote:
> 
>>We solved the problem.  We replaced Q1 and Q2 on the DC input board
>>(Assy.  81895).  All is well.
>>
>>73,
>>Rick
> 
> 
> I was told that it could be the diode or the transistor,
> 2N2222 as i recall.
> 
> Haven't gotten back to it yet, hope to later this week.
> 
> Were both of those transistors 2N2222's?
> 
> doc
> 
> 
> ------------------------------------------------------------------------
>