[TenTec] DRM on the Orion

[Carl Moreschi]

That's great information Mark.  Thanks for sharing it with us.

73,

Carl Moreschi N4PY
Franklinton, North Carolina
n4py at earthlink.net
----- Original Message -----
From: "Mark Erbaugh" <mark at microenh.com>
To: <tentec at contesting.com>
Sent: Tuesday, July 20, 2004 3:43 PM
Subject: [TenTec] DRM on the Orion


> Continuing in my DRM experiments with the open source Dream software, I
> fabricated a simple Y cable to bring the 14 kHz IF from the Orion
> sub-receiver out to the SPARE jack on the back. I fed that directly into
the
> soundcard line input and had no trouble receiving a DRM broadcast from the
> CBC.  The software found the DRM signal at 14 kHz and locked on to it. I
was
> able to tune the Orion to the published broadcast frequency.  The Y cable
> can be easily removed and the Orion restored to it's original condition
> without any soldering and both ends of the cable are easily reached with
> just the top cover removed.
>
> 73,
> Mark
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec