[TenTec] Re: Heil ProSet on Orion - reprise
Ron Martin
royalct at inr.net
Thu Jul 22 16:16:36 EDT 2004
Hi Duane,
No PTT on any of the 4 Hiel based microphones.
Ron .... NU1U
Duane A Calvin writes:
> Do you also use the PTT connections?
>
> Paul's words were that pin 2 should never be tied to chassis ground.
> That is essentially what Heil's page recommends - a general
> recommendation, not Orion-specific. (Pin 2 connects to the shield of the
> ProSet microphone cable.) Also, Heil uses this pin as the return for the
> PTT switch, while Paul said this should go to chassis ground (i.e.,
> connector shell.)
>
> My original postings last month go into the detail of the problem - I
> won't repeat it here. I do not think I have an RF problem, and still
> need to rule out ground loops. That will hopefully happen this evening.
> The PTT may have something to do with it (I use the Heil footswitch with
> their ProSet Ten-Tec adapter.) I've gotten all kinds of suggestions,
> many conflicting, but all seemed to work for each person sending them.
> Some said no problem was had, but I definitely have one with the ProSet
> and Heil adapter that is not there with 2 other Ten-Tec microphones.
>
> I'll let the list know what I find that fixes it on the off chance that
> someone else has the same problem later on.
>
> 73, Duane
>
> . . . snip . . .
>
>> What's the issue? I am curious....
>>
>>
>> Ron ..... NU1U
>>
>
> Duane Calvin, AC5AA
> Austin, Texas
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
More information about the TenTec
mailing list