[TenTec] ORION Hi/Lo Cut control
Bob Henderson
bob at cytanet.com.cy
Fri Jun 18 01:24:43 EDT 2004
Thank you guys for your responses on this one. You have helped shed a
great deal of light upon the matter. Some of you apparently see the
same effects I have described whilst others have Hi/Lo cut controls
which work the way I wish mine did. Curious!
Rich, K5SF really shed light with his comment that these controls appear
to work differently depending upon whether PBT and BW controls were set
for main/sub rx tracking or not.
I have typically set-up my Orion to have these functions set to track as
that has seemed to suit my operating habits. All of the characteristic
behaviour I have described, occurs with PBT/BW tracking set.
I have, with Rich's prompting, investigated operation of these controls
with tracking for PBT/BW disabled. Lo and behold the Hi/Lo Cut controls
operate exactly as I believe they should.
On further investigation I see that if only PBT Track is set while BW
track remains off correct operation continues to take place. It is only
when BW Track is set that operation of these controls is screwed up.
Grant/Merle
You may want to try setting BW Track to on in the RX menu to see if that
has the same ill effects on the operation of your Hi/Lo Cut controls. I
will be surprised if it doesn't.
I think we're getting pretty close to having this well enough defined to
convey to TT so they can sort it out.
73 de Bob, 5B4AGN
More information about the TenTec
mailing list