[TenTec] Heil ProSet adapter with Orion -- hum?

[Jim Brown]

On Wed, 23 Jun 2004 10:20:36 EDT, Kc9cdt at aol.com wrote:

>The RF feedback issue is one that has been discussed over & over.

If you have RF feedback, it may be a pin 1 problem. Cable shields should 
go to the chassis, NOT to the circuit board. All the TenTec gear I have takes 
them to the circuit board and not the chassis, which is a recipe for RF 
feedback if there is RF in the shack. 

Jim Brown K9YC